Sponsored by: Tnemec Presenters: Randy Moore and Scott Keilbey Important changes to NSF 61 are coming that affect the types of coatings used in potable water. This webinar will discuss the adoption of NSF 600, its relation to NSF 61, and what facility owners, engineers, and fabricators will need to do to ensure they are […]

Presenter: Brian Orr Brian Orr, Associate Project Engineer at UL, will discuss the UL 142 and UL 142A Industry File Review with STI/SPFA members. Topics covered will include: UL 142 10th Edition UL 142A 1st Edition Effective Date Kickoff A question and answer session will take place following the presentation. Register for Webinar

Join STI/SPFA for association updates and reports from each section and committee including: Safety and Health Committee Pressure Vessel & Special Fab Section Steel Water Pipe Section Shop Fabricated Tank Section Field Erected Tank Section Affiliate Member Committee The STI/SPFA Board of Directors will also be elected. Plus, winners of the Product of the Year […]

Presented by: The Fuels Institute The Fuels Institute commissioned “Impact of Transportation-related Environmental Initiatives” to identify the broad selection of policy options that might be available to reduce emissions from the transportation sector. This webinar will provide a comparative analysis of the most prominent options under consideration throughout the world, objectively evaluating each according to […]

Presenter: John Grocki This introduction to duplex stainless steels will provide attendees with information on material selection criteria along with mechanical properties of stainless steel. Topics covered will include: Materials Selection criteria Design codes Fabrication Inspection and maintenance Register for Webinar

Presented by: Paul Looney Unfair market conditions and trade practices of foreign competitors threaten to devastate our industry if left unchecked. Join us for a discussion lead by the Coalition of Energy Equipment Manufacturers (CEEM) including updates on Sec. 301 tariffs, the position of the current administration, and next steps to ensure the future is […]

Sponsored by: alliantgroup Presented by: Brian Aumueller The latest relief package has greatly expanded the cash funds available to American businesses but there is a lot of misinformation surrounding its provisions. Guidance was just released by the Service, however, and businesses that thought they do not qualify for relief incentives need to take another look. […]

Sponsored by: Carboline Presented by: Brian Cheshire and Anthony Grigsby Over the last few decades, air quality regulations and other concerns have pushed coating manufacturers to develop more high-solids and even 100% solids technologies. There are numerous steel tank lining applications where these technologies have been-and will continue to be-used. The water tank market, with […]

Presented by: Michael Oesterle Every employer should strive to maintain a safe and OSHA compliant workplace. Not only are customers, insurers and others increasingly scrutinizing employers’ OSHA records as a condition of doing business, but OSHA penalties and citations can be substantial – with well over $100,000 penalties being assessed for a single willful or […]

Presenter: June Brennan Medical leaves can disrupt the workflow of a team, increase overtime, and reduce output. How can businesses reduce time away from work and ​minimize the misuse of medical leaves? Attendees will learn how to reduce days out and improve employee morale through this informative session. Topics covered will include: What is the […]

Presented by: SSABPresenter: Jeff Moskaluk Jeff Moskaluk, Senior Vice President, Chief Commercial Officer for SSAB, will open with a brief high-level discussion on how SSAB views the current marketplace, including supply-chain issues. The remainder of time will be open to STI/SPFA members for questions and discussions. Registration is free to all STI/SPFA members.   Register […]

Sponsored by: OneCIS Insurance Company Presented by: Paul Shanks The issuance date for the 2021 Edition of the ASME Code is July 1, 2021 and mandated on January 1, 2022. Join OneCIS Insurance Company’s Technical Consultant, Mr. Paul Shanks, as he discusses the changes in the 2021 ASME Pressure Vessel Code, Section VIII, Division 1. […]

Sponsored by: American Ladder Institute in cooperation with Louisville Ladder, Inc. Presented by: Michael Van Bree This presentation will provide training in safe portable ladder practices. Instruction will be provided for the selection, inspection, set-up, use, transport and care of typical self-supporting stepladders and non-self-supporting single and extension ladders. Ladders are useful tools that when […]

Unfair market conditions and trade practices of foreign competitors threaten to devastate our industry if left unchecked. Join us for a discussion lead by the Coalition of Energy Equipment Manufacturers (CEEM) including updates on Sec. 301 tariffs, the position of the current administration, and next steps to ensure the future is made in America. We […]

Presented by: Michael Pischke The National Board of Boiler and Pressure Vessel Inspectors (NBBI) began its service in 1919 with the formation of a group of State Boiler Chiefs who had the single-minded goal of “One Code, One Inspector, One Stamp” for all boilers and pressure vessels. Over these 100 years, The National Board developed […]

Presented by: Chason J. Coelho, Ph.D. CSP CFI and Scott McLean, Ph.D In recent years, occupational safety and health professionals have increasingly recognized human fatigue as a safety hazard. Human fatigue can be defined as a state of reduced mental or physical capability that results from sleep loss, circadian challenge, exertive or repetitive task factors, […]

Presented by: FMI Presenter: Tracey Smith The value of a high-performing team plays a crucial role in organizational success. Yet a high percentage of teams (nearly 80%) continue to limit their potential by operating in substandard, dysfunctional levels of engagement. If effective team collaboration can dramatically impact organizational performance and individual outcomes, how should we […]

Presented by: FMI Presenter: Tracey Smith Rapid changes in technology, globalization and workforce demographics are significantly changing the way we do business at every level. These factors are also profoundly diminishing our ability to recruit and retain quality people, especially as we attempt to develop them into future leaders. By making certain your organization understands […]

Presenters: Alan Taxman Where do U.S. equity markets stand and what should we watch for in the coming months? Join us for a general overview of the most relevant topics in the current market and economy including: Keeping up with market trends Separating ‘noise’ from ‘signals’ Identifying signals of change in the economy and markets […]

Presented by: Malta Dynamics Presenter: Michele Tipton This course will include brief discussions on OSHA vs ANSI, talk about the three main persons associates with a job, learn about the hierarchy of fall protection, and dive deeper into the personal fall arrest system. This webinar is free to all attendees. Register for Webinar

Presented by: National Board of Boiler and Pressure Vessel Inspectors Presenter: Mark Mooney Mark Mooney, Director of Operations for NBBI JRS, will introduce JRS and how it will be integrated into EDT. Attendees will be encouraged to ask questions and provide feedback on both EDT and JRS and how these could be used to benefit […]

Presented by: National Board of Boiler and Pressure Vessel Inspectors Presenter: Mark Mooney Join Mark Mooney, Director of Operations for NBBI JRS, for a follow-up discussion on JRS. Discussion items will include: How manufacturers envision implementation of a uniform QR coding of boilers and pressure vessels Benefits of this implementation across the industry Volunteers to […]

Presenter: Wilson Frazier The more time an employee misses due to a workplace injury, the less likely they are to return to the workforce. This webinar will discuss the process of getting an injured worker back to work, return to work options, and how to plan for success. This webinar is free to STI/SPFA members. […]

Presenter: Leslie Shiner Cost: STI/SPFA Members: $0.00 Non-Members: $50.00 As a fabricator, profits must be based on a process, not accidental. This session focuses on the five key areas of your business to ultimately strengthen your sales, improve your job processes, and increase your profitability. Participants will leave with a list of 25 ways to […]

Presented by: Mike Harris Welding fumes are particulates derived from the melting, volatilization, and condensation of solid state materials. It is important to recognize and understand potential hazards of welding fumes to anticipate and control health hazards. During this webinar, attendees will: Determine how to recognize hazards associated with welding processes Discuss recently revised exposure […]

Presented by: Malta Dynamics Presenter: Greg Brown For the 11th year in a row, OSHA revealed that falls are the number one cause for injuries in the workplace. Do you have trouble getting your crew to wear their fall protection safety equipment? Do you want to know how to fix it? Join us for a […]

Sponsored by: D3 Technologies Presenter: George Williams Learn how you can automate the creation of project specific estimates, sales quoting documents, BOMs, 3D models, both sales approval and fabrication drawings, and more with D3’s CAD agnostic Ruler Automation platform. D3 specializes in the Pressure Vessel, Heat Exchanger, Shop Tank, and Field Erected Tank markets so […]

Presented by: Jim Viale Learn about pitfalls and mistakes to avoid in tank construction and design. Registration is free to all attendees. Register for Webinar

Presented by: The Lincoln Electric Company Presenter: Charlie Cross Welding records are a growing theme in the industry that supports compliance needs. Identify how welding procedure specifications, procedure qualification records, and welder qualification records can improve operations. Explore how welding records relate to management practices. This webinar is free to STI/SPFA members.   Register for […]

Presented by: Pressure Vessel Engineering Presenters: Steve Munn and Ray Stroud This webinar will provide an overview of what a CRN is and what is required to operate pressurized equipment in Canada (spoiler alert – registration is usually required if over 15 psi). Topics covered will include common exemptions, how the process works, a general […]

Presented by: Chason J. Coelho, Ph.D. CSP CFI Whether it is done in the interest of safety or quality, cause analysis (CA) can be hard. It happens after things fail to go as planned. It is responsive to an unexpected event, or set of events, which means analysts are unable to plan in advance. This […]

Presented by: The Lincoln Electric Company Presenter: Charlie Cross Explore high technology and industry 4.0 solutions that add value to the welding industry. Identify new ways proven to drive productivity, quality, and safety. Several solutions and examples will be covered. This webinar is free to STI/SPFA members.   Register for Webinar  

Presented by: FMI Presenter: Rachel Fitch In this presentation, Rachel will share current talent development trends from FMI’s 2022 client survey. She’ll also demonstrate some basic coaching skills that managers can implement immediately to support employee growth, initiative and goal ownership. This program will be interactive, with lots of opportunities to practice new skills and […]

Presenters: Alan Taxman Where do U.S. equity markets stand and what should we watch for in the coming months? Join us for a general overview of the most relevant topics in the current market and economy including: Keeping up with market trends Separating ‘noise’ from ‘signals’ Identifying signals of change in the economy and markets […]